Specifications
| Type | Description |
|---|---|
| Part Number | XL-ITR1100 |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | Black thermoplastic housing; outline dimensions in mm, tolerance ±0.3 mm unless otherwise specified |
| Emitter Type | Infrared emission diode; integrated input emitter |
| Detector Type | NPN silicon phototransistor; integrated output detector |
| Peak / Cut-off Wavelength | 940 nm; λp |
| Input Emitter Power Dissipation | 75 mW; Ta=25°C |
| Continuous Forward Current | 50 mA; Ta=25°C |
| Peak Forward Current | 1000 mA; pulse width ≤100 µs, duty cycle=1%, Ta=25°C |
| Input Reverse Voltage | 5 V; Ta=25°C |
| Output Detector Power Dissipation | 75 mW; Ta=25°C |
| Collector-Emitter Voltage | 30 V; Ta=25°C |
| Emitter-Collector Voltage | 5 V; Ta=25°C |
| Collector Current | 20 mA; IC(on), Ta=25°C |
| Operating Temperature | -25 to +85 °C; Topr |
| Storage Temperature | -40 to +85 °C; Tstg |
| Lead Soldering Temperature | 260 °C; soldering 2 mm from body for 5 seconds |
| Forward Voltage | Typ 1.2 V, Max 1.6 V; IF=20 mA, Ta=25°C |
| Input Peak Wavelength | Typ 940 nm; IF=20 mA, Ta=25°C |
| Reverse Current | Max 10 µA; VR=5 V, Ta=25°C |
| Dark Current | Max 100 nA; Ee=0 mW/cm², VCE=20 V, Ta=25°C |
| Collector-Emitter Saturation Voltage | Max 0.4 V; IC=2 mA, Ee=1 mW/cm², Ta=25°C |
| Rise Time | Typ 15 µs; VCE=5 V, IC=1 mA, RL=1000 Ω, Ta=25°C |
| Fall Time | Typ 15 µs; VCE=5 V, IC=1 mA, RL=1000 Ω, Ta=25°C |
| Collector Current / Photocurrent | Min 0.5 mA, Typ 10 mA; IF=20 mA, VCE=5 V, Ta=25°C |
| Voltage Grading Code | R2-4: Min 1.2 V, Max 1.6 V; IF=20 mA |
| Collector Current Grading Code | IC23-33: Min 4 mA, Max 14 mA; IF=20 mA, VCE=5 V |
| Moisture Sensitivity Level | MSL 2 |
| Wave Soldering Limit | 240±5 °C for 6 s recommended maximum |
| Wave Soldering Passes | No more than once |
| Manual Soldering Temperature | <300 °C for ≤3 s per terminal; soldering iron capacity <25 W |
| Datasheet Status | request_only |
Product Overview
The XL-ITR1100 is a XINGLIGHT infrared transmissive photoelectric switch classified in the LED category. It combines an integrated infrared emission diode with an integrated NPN silicon phototransistor detector, supporting object-interruption sensing where an infrared beam is passed through a transmissive slot or path.
The device uses a black thermoplastic housing with dimensions stated in millimeters and a ±0.3 mm general tolerance unless otherwise specified. Optical and electrical parameters include 940 nm peak wavelength, 50 mA continuous forward current, 1000 mA peak forward current under limited pulse conditions, 30 V collector-emitter voltage, and a collector current rating of 20 mA. At IF=20 mA and VCE=5 V, photocurrent is specified at 0.5 mA minimum and 10 mA typical.
Assembly limits include MSL 2 moisture sensitivity, 260 °C lead soldering for 5 seconds at 2 mm from the body, wave soldering at 240±5 °C for 6 seconds maximum with no more than one pass, and manual soldering below 300 °C for up to 3 seconds per terminal.
Key Features
- Infrared emission diode integrated as input emitter
- NPN silicon phototransistor integrated as output detector
- 940 nm peak wavelength for infrared sensing
- 50 mA continuous forward current at 25°C
- 30 V collector-emitter voltage rating at 25°C
- Typical 15 µs rise and fall response times
- Photocurrent specified from 0.5 mA to 10 mA
- Black thermoplastic housing with ±0.3 mm tolerance
- MSL 2 moisture sensitivity level stated
- Wave soldering limited to one recommended pass
Typical Applications
- Object interruption sensing
- Slot-type presence detection
- Infrared transmissive switching
- Position detection assemblies
- Motion path interruption detection
- Equipment limit sensing
- Encoder or index detection
Procurement Notes
When requesting a quote for XL-ITR1100, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What type of sensor is the XL-ITR1100?
The XL-ITR1100 is an infrared transmissive photoelectric switch. It integrates an infrared emission diode as the input emitter and an NPN silicon phototransistor as the output detector.
What wavelength does the XL-ITR1100 emitter use?
The extracted datasheet facts specify a 940 nm peak wavelength. The input peak wavelength is also listed as typical 940 nm at IF=20 mA and Ta=25°C.
What are the main output detector ratings?
The output detector has 75 mW power dissipation at Ta=25°C, 30 V collector-emitter voltage, 5 V emitter-collector voltage, and 20 mA collector current rating under IC(on) conditions.
What soldering limits apply to this part?
Lead soldering is specified at 260 °C for 5 seconds, 2 mm from the body. Wave soldering is recommended at 240±5 °C for 6 seconds maximum with no more than one pass.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.