Specifications
| Type | Description |
|---|---|
| Part Number | XL-2012UPC |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 2012 SMD, 2.0 x 1.2 x 0.8 mm |
| Component Type | LED |
| Outline Dimensions | 2.0 x 1.2 x 0.8 mm; L/W/H |
| Luminous Color | Pink; pink colloid |
| Colloid Color | Pink; device appearance |
| Moisture Sensitivity Level | MSL 3 |
| RoHS Compliance | Complies with RoHS directive |
| Maximum Power Dissipation | 70 mW; Ta=25°C |
| Maximum Continuous Forward Current | 20 mA; Ta=25°C |
| Peak Forward Current | 80 mA; pulse width <=0.1 ms, duty <=1/10, Ta=25°C |
| Maximum Reverse Voltage | 5 V; Ta=25°C |
| ESD Rating | 2000 V; antistatic ability, Ta=25°C |
| Operating Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum rating table |
| Storage Temperature Range | -40 to +85 °C; Ta=25°C absolute maximum rating table |
| Lead Soldering Temperature and Time | 260°C for <=6 s; absolute maximum rating |
| Luminous Intensity | 240 to 500 mcd; IF=20 mA, Ta=25°C |
| Chromaticity Coordinate X | Typ 0.30; IF=20 mA, Ta=25°C |
| Chromaticity Coordinate Y | Typ 0.14; IF=20 mA, Ta=25°C |
| Forward Voltage | 2.7 to 3.4 V; IF=20 mA, Ta=25°C |
| Viewing Angle | Typ 120°; 2θ1/2, IF=20 mA, Ta=25°C |
| Reverse Current | Max 1 µA; VR=5 V, Ta=25°C |
| Color Temperature | Not specified; IF=20 mA, Ta=25°C |
| Brightness Bin D7 | 240 to 270 mcd; IF=20 mA |
| Brightness Bin D8 | 270 to 300 mcd; IF=20 mA |
| Brightness Bin D9 | 300 to 350 mcd; IF=20 mA |
| Brightness Bin E1 | 350 to 400 mcd; IF=20 mA |
| Brightness Bin E2 | 400 to 450 mcd; IF=20 mA |
| Brightness Bin E3 | 450 to 500 mcd; IF=20 mA |
| Brightness Tolerance | ±10%; brightness grading |
| Voltage Bin M18-9 | 2.7 to 2.8 V; IF=20 mA |
| Voltage Bin M19-1 | 2.8 to 2.9 V; IF=20 mA |
| Voltage Bin M19-2 | 2.9 to 3.0 V; IF=20 mA |
| Voltage Bin M19-3 | 3.0 to 3.1 V; IF=20 mA |
| Voltage Bin M19-4 | 3.1 to 3.2 V; IF=20 mA |
| Voltage Bin M19-5 | 3.2 to 3.3 V; IF=20 mA |
| Voltage Bin M19-6 | 3.3 to 3.4 V; IF=20 mA |
| Voltage Tolerance | ±0.1 V; voltage grading |
| Chromaticity Coordinate Tolerance | ±0.01; color grading |
| Default Test Ambient Temperature | 25±5°C; unless otherwise indicated |
| Outline Dimension General Tolerance | ±0.25 mm; unless otherwise noted |
| Tape and Reel Dimension Tolerance | ±0.1 mm; belt and disk dimensions |
| Recommended Hand Soldering Iron Power | <30 W; hand soldering for repair/rework |
| Hand Soldering Temperature | <300°C; each terminal once, less than 3 s |
| Maximum Reflow Cycles | 2 times; reflow soldering |
| Recommended Maximum Welding Temperature | 240±5°C for 6 s |
| Opened Package Floor Life | 168 hours / 7 days; stored at <=30°C and <=40% RH |
| Baking Condition | 60±5°C for 24 hours |
| Datasheet Status | request_only |
Product Overview
Electrical and optical parameters are specified at IF=20 mA and Ta=25°C unless noted. The LED provides 240 to 500 mcd luminous intensity, 2.7 to 3.4 V forward voltage, typ 120° viewing angle, and typ chromaticity coordinates of x=0.30 and y=0.14. Absolute maximum ratings include 70 mW power dissipation, 20 mA continuous forward current, 80 mA peak forward current under the stated pulse condition, and 5 V maximum reverse voltage.
Assembly data includes 260°C for <=6 s lead soldering, up to 2 reflow cycles, and a recommended maximum welding temperature of 240±5°C for 6 s. The part is MSL 3, with an opened package floor life of 168 hours / 7 days at <=30°C and <=40% RH. These parameters support use in compact pink indication, panel marking, and surface-mount display assemblies.
Key Features
- Pink luminous output with pink colloid appearance
- 2012 SMD package, 2.0 x 1.2 x 0.8 mm
- 240 to 500 mcd luminous intensity at 20 mA
- 2.7 to 3.4 V forward voltage at 20 mA
- Typ 120° viewing angle at 20 mA
- Maximum continuous forward current rated 20 mA
- Peak forward current rated 80 mA under pulse condition
- Reverse current max 1 µA at 5 V
- MSL 3 moisture sensitivity level
- RoHS directive compliance stated in datasheet
- -40 to +85 °C operating temperature range
- Two maximum reflow soldering cycles
Typical Applications
- Pink status indicators
- Compact SMD display marking
- Surface-mount indicator assemblies
- Panel indication LEDs
- Color-coded device indication
- Reflow-assembled LED boards
- Hand-reworkable LED assemblies
Procurement Notes
When requesting a quote for XL-2012UPC, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
FAQ
What package size does XL-2012UPC use?
XL-2012UPC uses a 2012 SMD package with outline dimensions of 2.0 x 1.2 x 0.8 mm. The datasheet also states a general outline dimension tolerance of ±0.25 mm unless otherwise noted.
What optical output is specified for XL-2012UPC?
At IF=20 mA and Ta=25°C, XL-2012UPC is specified for 240 to 500 mcd luminous intensity, typ chromaticity coordinates x=0.30 and y=0.14, and a typ 120° viewing angle.
What forward voltage range applies at 20 mA?
The datasheet specifies a forward voltage range of 2.7 to 3.4 V at IF=20 mA and Ta=25°C. Voltage bin ranges from M18-9 through M19-6 divide this range in 0.1 V steps.
What are the soldering limits for this LED?
The absolute maximum lead soldering condition is 260°C for <=6 s. For assembly, the datasheet lists a recommended maximum welding temperature of 240±5°C for 6 s and a maximum of 2 reflow cycles.
How should opened packages be handled?
XL-2012UPC is rated MSL 3. Once opened, the package floor life is 168 hours / 7 days when stored at <=30°C and <=40% RH. Baking is specified as 60±5°C for 24 hours when required.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.