Specifications
| Type | Description |
|---|---|
| Part Number | EL_DSE-0013346-19-217-Y5C-AP1Q2-3T-v4 |
| Manufacturer | EVERLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | 19-217 SMD-B; package dimensions shown in datasheet, unit mm, tolerance ±0.1 mm unless mentioned |
| Chip Material | AlGaInP |
| Emitted Color | Brilliant Yellow |
| Resin Color | Water Clear |
| Reverse Voltage | 5 V |
| Forward Current | 25 mA |
| Peak Forward Current | 60 mA |
| Power Dissipation | 60 mW |
| Electrostatic Discharge | 2000 V |
| Operating Temperature | -40 to +85 °C |
| Storage Temperature | -40 to +90 °C |
| Reflow Soldering Temperature | 260 °C for 10 sec |
| Hand Soldering Temperature | 350 °C for 3 sec |
| Luminous Intensity | 45.0 min, 112.0 max mcd |
| Viewing Angle | 120° typ |
| Peak Wavelength | 591 nm typ |
| Dominant Wavelength | 585.5 min, 594.5 max nm |
| Spectrum Radiation Bandwidth | 15 nm typ |
| Forward Voltage | 1.70 min, 2.00 typ, 2.40 max V |
| Reverse Current | 10 µA max |
| Luminous Intensity Tolerance | ±11% |
| Dominant Wavelength Tolerance | ±1 nm |
| Reverse Operation Note | Device is not designed for reverse operation |
| Luminous Intensity Bin P1 | 45.0 to 57.0 mcd |
| Luminous Intensity Bin P2 | 57.0 to 72.0 mcd |
| Luminous Intensity Bin Q1 | 72.0 to 90.0 mcd |
| Luminous Intensity Bin Q2 | 90.0 to 112.0 mcd |
| Dominant Wavelength Bin D3 | 585.5 to 588.5 nm |
| Dominant Wavelength Bin D4 | 588.5 to 591.5 nm |
| Dominant Wavelength Bin D5 | 591.5 to 594.5 nm |
| Package Tolerance | ±0.1 mm unless mentioned |
| Reel Packaging | 8 mm tape on 7 inch diameter reel |
| Loaded Quantity | 3000 pcs per reel |
| Opened Package Storage Conditions | 30°C or less and 60% RH or less |
| Floor Life After Opening | 168 hours / 7 days |
| Baking Treatment | 60±5°C for 24 hours |
| Pb-Free Reflow Peak Temperature | 260°C max |
| Reflow Time Above 255°C | 10 sec max |
| Reflow Time Above 217°C | 30 sec max |
| Reflow Preheat Temperature | 150 to 200°C |
| Reflow Preheat Time | 60 to 120 sec |
| Reflow Preheating Duration | 60 to 150 sec |
| Maximum Reflow Cycles | 2 times |
| Soldering Iron Limit | Less than 350°C for 3 sec, once per terminal |
| Datasheet Status | request_only |
Product Overview
At IF=20 mA and Ta=25°C, the device is specified for 45.0 to 112.0 mcd luminous intensity, 591 nm typical peak wavelength, and 585.5 to 594.5 nm dominant wavelength. The optical specification also includes a 15 nm typical spectrum radiation bandwidth and a 120° typical viewing angle.
Key Features
- AlGaInP chip material with brilliant yellow emission
- Water clear resin construction specified in device guide
- 19-217 SMD-B package with millimeter dimensions
- 45.0 to 112.0 mcd at IF=20 mA
- 591 nm typical peak wavelength at IF=20 mA
- 585.5 to 594.5 nm dominant wavelength range
- 120° typical viewing angle at Ta=25°C
- 1.70 to 2.40 V forward voltage range
- 8 mm tape on 7 inch reel packaging
- 3000 pieces loaded quantity per reel
Typical Applications
- Brilliant yellow status indicators
- Surface-mount indicator assemblies
- Panel indication circuits
- Compact signal lighting
- Color-binned LED designs
Procurement Notes
When requesting a quote for EL_DSE-0013346-19-217-Y5C-AP1Q2-3T-v4, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
FAQ
What color does this EVERLIGHT LED emit?
The EL_DSE-0013346-19-217-Y5C-AP1Q2-3T-v4 emits brilliant yellow light. The datasheet lists AlGaInP chip material and a water clear resin in the device selection guide.
What are the optical ratings at IF=20 mA?
At IF=20 mA and Ta=25°C, luminous intensity is 45.0 to 112.0 mcd, peak wavelength is 591 nm typical, dominant wavelength is 585.5 to 594.5 nm, and viewing angle is 120° typical.
What soldering limits apply to this SMD LED?
The datasheet lists a 260°C for 10 sec reflow soldering temperature limit and 350°C for 3 sec hand soldering limit. Pb-free reflow peak temperature is specified as 260°C max.
Is the device intended for reverse operation?
No. The datasheet notes that the device is not designed for reverse operation. The VR condition is applied to the reverse current test only, where reverse current is 10 µA max at VR=5 V.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: June 30, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.