XL-J1608UOC-06 Orange SMD Indicator LED

Specifications

Product Overview

XINGLIGHT XL-J1608UOC-06 is an orange SMD indicator LED supplied in a 1608 surface-mount package. The outline dimensions are 1.6 x 0.8 x 0.6 mm with an outline dimension tolerance of ±0.25 mm unless otherwise noted. The luminous color is orange with a transparent/water colloid lens, and the component is listed with moisture sensitivity level MSL 3.

At IF=20 mA and Ta=25°C, the LED is specified for 80 to 210 mcd luminous intensity, 600 to 608 nm dominant wavelength, 605 nm typical peak wavelength, 20 nm typical half wave width, and 120° typical viewing angle. Forward voltage is 1.9 to 2.3 V under the same test conditions, while reverse current is <=1 µA at VR=5 V.

Assembly limits include 260°C for <=6 s lead soldering in the absolute maximum ratings and a recommended maximum welding temperature of 240 ±15°C for 6 s. Reflow soldering is limited to 2 cycles. Storage guidance includes 1 year before opening in moisture-proof anti-electrostatic packaging and 168 hours after opening at <=30°C and <=40% RH.

Key Features

• 1608 SMD package, 1.6 x 0.8 x 0.6 mm
• Orange luminous color with transparent/water colloid lens
• 80 to 210 mcd luminous intensity at 20 mA
• 600 to 608 nm dominant wavelength at 20 mA
• 1.9 to 2.3 V forward voltage at 20 mA
• 120° typical viewing angle at 20 mA
• 30 mA maximum continuous forward current rating
• -40 to +85°C operating temperature range
• MSL 3 moisture sensitivity level classification
• Maximum two reflow soldering cycles specified

Typical Applications

• Orange status indicators
• Compact panel indicators
• SMD signal indication
• Battery-powered device indicators
• Industrial control indicators
• Consumer electronics indicators
• Backlighting for small controls

Procurement Notes

When requesting a quote for XL-J1608UOC-06, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.