XL-JY2012UGC-11 Green SMD LED

Specifications

Product Overview

XL-JY2012UGC-11 is a XINGLIGHT green SMD LED supplied in a 2.0 x 1.2 x 1.1 mm package. The datasheet identifies the luminous color as green with transparent/water colloid construction and an MSL 3 moisture sensitivity level.

At IF=20 mA and Ta=25°C, the LED is specified for 600 to 1000 mcd luminous intensity, 515 to 530 nm dominant wavelength, 525 nm typical peak wavelength, 2.6 to 3.2 V forward voltage, 120° typical viewing angle, and 30 nm typical half-wave width. Reverse current is limited to ≤1 µA at VR=5 V and Ta=25°C.

Absolute ratings include 60 mW maximum power dissipation, 30 mA maximum continuous forward current, 80 mA peak forward current under pulsed conditions, 5 V maximum reverse voltage, and 2000 V ESD antistatic ability at Ta=25°C. Assembly guidance covers 260°C lead soldering for ≤6 s, maximum two reflow cycles, and recommended opened-package soldering within 168 hours.

Key Features

• 2.0 x 1.2 x 1.1 mm SMD LED package
• Green luminous color with transparent/water colloid construction
• 600 to 1000 mcd luminous intensity at 20 mA
• 515 to 530 nm dominant wavelength at 20 mA
• 2.6 to 3.2 V forward voltage at 20 mA
• 120° typical viewing angle at 20 mA
• 30 mA maximum continuous forward current at 25°C
• -40 to +85°C operating temperature range
• MSL 3 moisture sensitivity level
• Maximum two reflow soldering cycles

Typical Applications

• Green status indicators
• Surface-mount panel indicators
• Compact equipment displays
• Signal indication circuits
• Green backlighting points
• PCB-mounted visual alerts

Procurement Notes

When requesting a quote for XL-JY2012UGC-11, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.