Specifications
| Type | Description |
|---|---|
| Part Number | XL-DZT502SURD |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | F5 / 11.3 x 15.0 x 10.3 mm metal lamp holder |
| Appearance Dimension | F5 / 11.3 x 15.0 x 10.3 mm |
| Luminous Color | Red |
| Colloid Color | Red colloid |
| Moisture Sensitivity Level | MSL 2 |
| Environmental Compliance | RoHS compliant |
| Power Dissipation | 50 mW max, Ta=25°C |
| Continuous Forward Current | 20 mA max, Ta=25°C |
| Peak Forward Current | 80 mA max, Ta=25°C |
| Operating Ambient Temperature | -40°C to +85°C, absolute maximum rating |
| Storage Ambient Temperature | -40°C to +85°C, absolute maximum rating |
| Wave Soldering Temperature | 240°C for <=6 s, soldering point at least 2.0 mm from colloid bottom |
| Manual Soldering Temperature | 300°C for 3 s, soldering point at least 3.5 mm from colloid bottom |
| Luminous Intensity | 300 mcd min, 900 mcd max, IF=20 mA, Ta=25°C |
| Dominant Wavelength | 615 nm min, 635 nm max, IF=20 mA, Ta=25°C |
| Peak Wavelength | 625 nm typ, IF=20 mA, Ta=25°C |
| Forward Voltage | 1.8 V min, 2.2 V typ, 2.4 V max, IF=20 mA, Ta=25°C |
| Viewing Angle | 25° typ, IF=20 mA, Ta=25°C |
| Viewing Angle | 35° typ, IF=20 mA, Ta=25°C |
| Spectral Width at Half Height | 30 nm typ, IF=20 mA, Ta=25°C |
| Reverse Current | <=5 uA max, VR=5 V, Ta=25°C |
| Brightness Grade A4 | 300 to 400 mcd, IF=20 mA |
| Brightness Grade A5 | 400 to 500 mcd, IF=20 mA |
| Brightness Grade A6 | 500 to 700 mcd, IF=20 mA |
| Brightness Grade A7 | 700 to 900 mcd, IF=20 mA |
| Voltage Grade N12-7 | 1.8 to 2.0 V, IF=20 mA |
| Voltage Grade N12-8 | 2.0 to 2.2 V, IF=20 mA |
| Voltage Grade N12-9 | 2.2 to 2.4 V, IF=20 mA |
| Wavelength Grade HR01 | 615 to 620 nm, IF=20 mA |
| Wavelength Grade HR02 | 620 to 625 nm, IF=20 mA |
| Wavelength Grade HR03 | 625 to 630 nm, IF=20 mA |
| Wavelength Grade HR04 | 630 to 635 nm, IF=20 mA |
| Working Life Test | 1000 hrs, 22 pcs, fail qty 0/1, Ta=25°C ±5°C, IF=20 mA |
| High Temperature High Humidity Test | 1000 hrs, 22 pcs, fail qty 0/1, Ta=85°C ±5°C, RH=85% to 90% |
| High Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1, ambient temperature Ta=85°C ±5°C |
| Low Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1, ambient temperature Ta=-40°C ±5°C |
| Cold and Hot Cycle Test | 100 cycles, 22 pcs, fail qty 0/1, 100°C ±5°C for 30 min to -40°C ±5°C for 30 min, 5 min transition |
| Hot and Cold Impact Test | 100 cycles, 22 pcs, fail qty 0/1, 105°C ±5°C to -45°C ±5°C, 5 min each |
| Resistance to Soldering Heat Test | 2 times, 22 pcs, fail qty 0/1, solder temperature Tsol=250°C ±5°C |
| Lead Integrity Bend Test | 3 times, 22 pcs, fail qty 0/1, load 2.5 N (0.25 kgf), 0° to 90° to 0° |
| Outline Dimension Tolerance | ±0.25 mm unless otherwise specified, dimensions in millimeters |
| Packaging Type | In bags |
| Packaging Protection | Moisture-proof and anti-electrostatic foil bag |
| Recommended Storage Environment | Temperature <=30°C, relative humidity <=70% |
| Recommended Original Package Storage Time | No more than 3 months |
| Cleaning Solvent Exposure | Ethanol wipe or soak for <=3 minutes, room temperature |
| Lead Forming Distance | At least 2 mm from colloid, before welding |
| Electrostatic Protection HBM | HBM <1000 V, use antistatic devices during handling |
| Electrostatic Protection Machine Model | <100 V, use antistatic devices during handling |
| Datasheet Status | request_only |
Product Overview
XL-DZT502SURD is a XINGLIGHT red through-hole LED lamp supplied in an F5 / 11.3 x 15.0 x 10.3 mm metal lamp holder package. The device has red luminous output and red colloid. Its datasheet lists RoHS compliance and Moisture Sensitivity Level 2 for handling classification.
At IF=20 mA and Ta=25°C, optical and electrical parameters include 300 to 900 mcd luminous intensity, 615 to 635 nm dominant wavelength, 625 nm typical peak wavelength, 30 nm typical spectral width at half height, and 1.8 V minimum, 2.2 V typical, 2.4 V maximum forward voltage. The datasheet also lists 25° typical and 35° typical viewing-angle values.
Assembly limits include 240°C wave soldering for no more than 6 seconds with the soldering point at least 2.0 mm from the colloid bottom, and 300°C manual soldering for 3 seconds with the soldering point at least 3.5 mm from the colloid bottom. Storage guidance specifies temperature no higher than 30°C and relative humidity no higher than 70%. The through-hole red lamp format fits indicator, signaling, and panel-light applications.
Key Features
- Red through-hole LED lamp construction
- F5 11.3 x 15.0 x 10.3 mm appearance
- Red luminous color with red colloid
- 300 to 900 mcd luminous intensity at 20 mA
- 615 to 635 nm dominant wavelength at 20 mA
- 1.8 to 2.4 V forward voltage range
- 20 mA continuous forward current maximum
- -40°C to +85°C operating ambient range
- RoHS compliant and MSL 2 classified
- Moisture-proof anti-electrostatic foil bag packaging
Typical Applications
- Red status indicators
- Through-hole panel lamps
- Signal indication assemblies
- Instrument indicator lighting
- Control panel annunciators
- PCB-mounted red indicators
- Equipment fault indicators
Procurement Notes
When requesting a quote for XL-DZT502SURD, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
XL-GK152 Through-Beam Sensor: Thermal & Signal Drift Analysis
The XINGLIGHT XL-GK152 is a 940nm through-beam photoelectric switch designed for high-reliability object detection in compact OEM circuits. This technical analysis evaluates cri...
XL-ITR20005 Transmissive Sensor: SMT Integration & Signal Consistency
The XL-ITR20005 from XINGLIGHT is a transmissive photoelectric switch designed for compact automation and consumer electronics, utilizing a 940nm infrared emitter and phototrans...
XL-IRM0038C IR Receiver: Evaluating 37.9kHz Immunity & SMT Integration
The XL-IRM0038C from XINGLIGHT is a LED designed for indicator and backlight applications. This technical guide helps design engineers and procurement teams evaluate the compone...
XL-IRM0038C-38B SMD LED — Technical Specifications & Design Guide
The XL-IRM0038C-38B from XINGLIGHT is a LED designed for indicator and backlight applications. This technical guide helps design engineers and procurement teams evaluate the com...
FAQ
What package is used for XL-DZT502SURD?
XL-DZT502SURD uses an F5 / 11.3 x 15.0 x 10.3 mm metal lamp holder package. The outline dimensions are specified in millimeters, with ±0.25 mm tolerance unless otherwise specified.
What are the main optical ratings at 20 mA?
At IF=20 mA and Ta=25°C, the datasheet lists 300 to 900 mcd luminous intensity, 615 to 635 nm dominant wavelength, 625 nm typical peak wavelength, and 30 nm typical spectral width at half height.
What forward voltage range does this LED specify?
At IF=20 mA and Ta=25°C, XL-DZT502SURD specifies 1.8 V minimum, 2.2 V typical, and 2.4 V maximum forward voltage. Voltage grades N12-7, N12-8, and N12-9 cover 1.8 to 2.4 V.
What soldering limits are listed in the datasheet?
Wave soldering is listed as 240°C for no more than 6 seconds with the soldering point at least 2.0 mm from the colloid bottom. Manual soldering is 300°C for 3 seconds at least 3.5 mm from the colloid bottom.
How should XL-DZT502SURD be stored before use?
The recommended storage environment is temperature no higher than 30°C and relative humidity no higher than 70%. The datasheet recommends original package storage for no more than 3 months.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 5, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.