Specifications
| Type | Description |
|---|---|
| Part Number | XL-DZT502UBD |
| Manufacturer | XINGLIGHT |
| Product Type | SMD LED |
| Category | LED |
| Package / Case | F5/11.3*15.0*10.3 mm metal hood lamp holder |
| Appearance Dimension | F5/11.3*15.0*10.3 mm |
| Luminous Color | Blue |
| Colloid Color | Blue colloid |
| RoHS Compliance | Meets ROHS requirements; environmental protection product |
| Moisture Sensitivity Level | MSL 2 |
| Packaging Standard | EIA standard packaging |
| Power Dissipation | 70 mW at Ta=25°C |
| Maximum Continuous Forward Current | 20 mA at Ta=25°C |
| Peak Forward Current | 80 mA at Ta=25°C |
| Operating Ambient Temperature | -40°C to +85°C |
| Storage Ambient Temperature | -40°C to +85°C |
| Wave Soldering Condition | 240°C, <=6 s; soldering point more than 2.0 mm from colloid bottom |
| Manual Welding Condition | 300°C, 3 s; soldering point more than 2.0 mm from colloid bottom |
| Luminous Intensity | 1000-3000 mcd at IF=20 mA, Ta=25°C |
| Dominant Wavelength | 460-470 nm at IF=20 mA, Ta=25°C |
| Peak Wavelength | 465 nm typ. at IF=20 mA, Ta=25°C |
| Forward Voltage | 2.8 V min., 3.0 V typ., 3.6 V max. at IF=20 mA, Ta=25°C |
| Viewing Angle | 35 deg typ. at IF=20 mA, Ta=25°C |
| Spectral Width at Half Height | 30 nm typ. at IF=20 mA, Ta=25°C |
| Reverse Current | <=5 μA at VR=5 V, Ta=25°C |
| Brightness Grade A8 | 900-1200 mcd at IF=20 mA |
| Brightness Grade A9 | 1200-1500 mcd at IF=20 mA |
| Brightness Grade B1 | 1500-1800 mcd at IF=20 mA |
| Brightness Grade B2 | 1800-2100 mcd at IF=20 mA |
| Brightness Grade B3 | 2100-2500 mcd at IF=20 mA |
| Brightness Grade B4 | 2500-3000 mcd at IF=20 mA |
| Voltage Grade N13-3 | 2.8-3.0 V at IF=20 mA |
| Voltage Grade N13-4 | 3.0-3.2 V at IF=20 mA |
| Voltage Grade N13-5 | 3.2-3.4 V at IF=20 mA |
| Voltage Grade N13-6 | 3.4-3.6 V at IF=20 mA |
| Wavelength Grade HB04 | 460-465 nm at IF=20 mA |
| Wavelength Grade HB05 | 465-470 nm at IF=20 mA |
| Wavelength Grade HB06 | 470-475 nm at IF=20 mA |
| Working Life Test | 1000 hrs, 22 pcs, fail qty 0/1 at Ta=25°C ±5°C, IF=20 mA |
| High Temperature High Humidity Test | 1000 hrs, 22 pcs, fail qty 0/1 at Ta=85°C ±5°C, RH=85-90% |
| High Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1 at ambient temperature Ta=85°C ±5°C |
| Low Temperature Storage Test | 1000 hrs, 22 pcs, fail qty 0/1 at ambient temperature Ta=-40°C ±5°C |
| Cold and Hot Cycle Test | 100 cycles, 22 pcs, fail qty 0/1; 100°C ±5°C for 30 min, transition 5 min, -40°C ±5°C for 30 min |
| Hot and Cold Impact Test | 100 cycles, 22 pcs, fail qty 0/1; 105°C ±5°C for 5 min, -45°C ±5°C for 5 min |
| Resistance to Soldering Heat Test | 2 times, 22 pcs, fail qty 0/1; solder temperature T.sol=250°C ±5°C |
| Lead Integrity Test | 3 times, 22 pcs, fail qty 0/1; load 2.5 N (0.25 kgf), 0°~90°~0° |
| Outline Dimension Tolerance | ±0.25 mm unless otherwise specified |
| Packaging Type | In bags |
| Packaging Protection | Moisture proof and anti-electrostatic foil bag |
| Recommended Storage Environment | Temperature <=30°C, relative humidity <=70%; original box storage recommended for no more than three months |
| Cleaning Limit | Ethanol wipe or soak for <=3 minutes at room temperature |
| Lead Bending Clearance | 2 mm from colloid before welding |
| Electrostatic Protection Rating | HBM <1000 V; machine discharge mode <100 V; use antistatic protection for InGaN series products |
| Datasheet Status | request_only |
Product Overview
XL-DZT502UBD is a XINGLIGHT blue through-hole LED lamp supplied in an F5/11.315.010.3 mm metal hood lamp holder package. The device has blue luminous color with blue colloid and is specified as an environmental protection product meeting RoHS requirements. It is supplied to EIA standard packaging requirements, with MSL 2 moisture sensitivity classification and bag packaging using moisture-proof and anti-electrostatic foil bags.
At IF=20 mA and Ta=25°C, the LED is specified for 1000-3000 mcd luminous intensity, 460-470 nm dominant wavelength, 465 nm typical peak wavelength, 35° typical viewing angle, and 30 nm typical spectral width at half height. Forward voltage is 2.8 V minimum, 3.0 V typical, and 3.6 V maximum, while reverse current is <=5 μA at VR=5 V and Ta=25°C.
Assembly limits include wave soldering at 240°C for <=6 s and manual welding at 300°C for 3 s, with the soldering point more than 2.0 mm from the colloid bottom. Use cases should respect the -40°C to +85°C operating range, storage recommendations, lead bending clearance, cleaning limit, and antistatic handling requirements for InGaN series products.
Key Features
- Blue through-hole LED lamp construction
- F5/11.3*15.0*10.3 mm metal hood lamp holder
- Blue colloid with blue luminous output
- 1000-3000 mcd luminous intensity at 20 mA
- 460-470 nm dominant wavelength at 20 mA
- 2.8-3.6 V forward voltage range at 20 mA
- 35 degree typical viewing angle at 20 mA
- -40°C to +85°C operating ambient range
- MSL 2 moisture sensitivity classification
- EIA standard packaging in protective foil bags
Typical Applications
- Blue PCB status indication
- Through-hole panel indicators
- Blue signal lamp positions
- Equipment status lamps
- Indicator assemblies using 20 mA drive
- Applications needing 35 degree viewing angle
Procurement Notes
When requesting a quote for XL-DZT502UBD, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.
If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.
For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.
Related Technical Articles
XL-GK152 Through-Beam Sensor: Thermal & Signal Drift Analysis
The XINGLIGHT XL-GK152 is a 940nm through-beam photoelectric switch designed for high-reliability object detection in compact OEM circuits. This technical analysis evaluates cri...
XL-ITR20005 Transmissive Sensor: SMT Integration & Signal Consistency
The XL-ITR20005 from XINGLIGHT is a transmissive photoelectric switch designed for compact automation and consumer electronics, utilizing a 940nm infrared emitter and phototrans...
XL-IRM0038C IR Receiver: Evaluating 37.9kHz Immunity & SMT Integration
The XL-IRM0038C from XINGLIGHT is a LED designed for indicator and backlight applications. This technical guide helps design engineers and procurement teams evaluate the compone...
XL-IRM0038C-38B SMD LED — Technical Specifications & Design Guide
The XL-IRM0038C-38B from XINGLIGHT is a LED designed for indicator and backlight applications. This technical guide helps design engineers and procurement teams evaluate the com...
FAQ
What package is used for XL-DZT502UBD?
XL-DZT502UBD is specified as an F5/11.3*15.0*10.3 mm metal hood lamp holder through-hole LED lamp. The outline dimension tolerance is ±0.25 mm unless otherwise specified.
What are the optical ratings at 20 mA?
At IF=20 mA and Ta=25°C, the LED has 1000-3000 mcd luminous intensity, 460-470 nm dominant wavelength, 465 nm typical peak wavelength, 35 degree typical viewing angle, and 30 nm typical spectral width at half height.
What forward voltage range does this LED specify?
At IF=20 mA and Ta=25°C, forward voltage is specified as 2.8 V minimum, 3.0 V typical, and 3.6 V maximum. Voltage grades N13-3 through N13-6 cover 2.8-3.6 V.
What soldering limits apply to XL-DZT502UBD?
Wave soldering is specified at 240°C for <=6 seconds, and manual welding is specified at 300°C for 3 seconds. In both cases, the soldering point must be more than 2.0 mm from the colloid bottom.
Technical Review & Sourcing Note
Prepared by LDeepAI Component Sourcing Team. Reviewed for RFQ, documentation and alternative sourcing use. Last updated: July 5, 2026.
This page is based on manufacturer datasheet information and LDeepAI sourcing review. Specifications should be verified against the official manufacturer datasheet before final procurement or design approval. Final electrical, optical and reliability approval should be confirmed by the buyer's engineering team.