XL-JY2012SURC-11 Red SMD LED

Specifications

Product Overview

XL-JY2012SURC-11 is a XINGLIGHT red SMD LED with transparent/water colloid construction and a compact 2.0 x 1.2 x 1.1 mm L/W/H outline. The device is specified as an LED component for surface-mount assemblies where a red optical output and small package footprint are required.

At IF=20 mA and Ta=25°C, the LED is specified for 120-240 mcd luminous intensity, 615-630 nm dominant wavelength, 625 nm typical peak wavelength, 20 nm typical half wave width, and 120° typical viewing angle. Electrical characteristics at the same test condition include 1.9-2.4 V forward voltage, while reverse current is limited to <=1 µA at VR=5 V.

Assembly and handling limits include MSL 3, RoHS Directive compliance, 260°C lead soldering for <=6 s, recommended welding temperature of 240±5°C for 6 s, and a maximum of two reflow soldering cycles. After opening, floor life is 168 hours / 7 days at <=30°C and <40%RH, with baking specified at 60±5°C for 24 hours when required.

Key Features

• Red luminous color with transparent/water colloid construction
• Compact 2.0 x 1.2 x 1.1 mm SMD package
• 120-240 mcd luminous intensity at IF=20 mA
• 615-630 nm dominant wavelength at IF=20 mA
• 1.9-2.4 V forward voltage at IF=20 mA
• 120° typical viewing angle at IF=20 mA
• 30 mA maximum continuous forward current
• 60 mW maximum power dissipation at Ta=25°C
• MSL 3 moisture sensitivity level
• RoHS Directive compliant environmental process
• Maximum two reflow soldering cycles
• 168-hour opened package floor life under specified conditions

Typical Applications

• Red status indication
• Compact SMD indicator boards
• Panel and control indicators
• Consumer electronic indicators
• Signal and notification lighting
• Reflow-assembled LED circuits
• Repair or rework assemblies

Procurement Notes

When requesting a quote for XL-JY2012SURC-11, buyers should confirm the manufacturer, package or case, required quantity, target date code, compliance documents, packing method, destination country and expected delivery schedule.

If alternatives are acceptable, buyers should share the approved vendor list, required electrical or optical limits, package constraints and qualification requirements. Any alternative part should be reviewed by the buyer's engineering team before production use.

For LED and optoelectronic sourcing, brightness bin, wavelength or color temperature bin, forward voltage range, viewing angle, moisture sensitivity level and soldering process limits may affect final selection, availability and lead time.